Version 1 – October 22, 2008
NOTE! This version has been superseded by the Version 1.1 specification on May 14, 2010.
A standard to allow individual builders to build modules to add to a micro scale city in a group build.
A 16 x 16 stud Module equals 1/4 of a city block. Four Modules create a short block in a city. Each four module block is ringed with a two stud road. Blocks connected together create a 4 stud wide road. Cars are 2 studs, buses or trucks 4 studs.
Scale: 1 brick is 9 feet, 1 plate is 3 feet and one stud is 7.5 feet. These are for reference only. The blocks are smaller than the blocks in a real city. Scale your buildings accordingly.
Base: A sandwich of plates and bricks create the base of the module. One plate layer for the bottom, one brick layer on top of that, one plate layer on top of the bricks. 1 x 2 Technic bricks with one hole are in the stud 8-9 positions on each side. There are 4 technics bricks used. This allows the modules to be connected with Technic pins.
Roads, Alleys and Sidewalks: The two outer rows of studs on two sides are the roads, the opposite two sides contain the optional alleys, and the sidewalks parallel the roads. Use two rows of black tiles for roads. Crosswalks are a 1 x 2 white tile at the 4th stud position from each corner. Use 1 row of dark gray tiles for alleys and parking lots. Use light gray tiles for sidewalks, although alternate colors can be used to tie the sidewalk to the building.
Download a Model File!
We have put together a generic model of the base module in LEGO Digital Designer so anyone can get started building their own Micropolis right away.
Micropolis Module Base (LXF)
Micropolis Module Base (LDraw)
Micropolis Module Base (LXFML)
Frequently Asked Questions
Q. Can I see some pictures of a Micropolis layout?
A. Absolutely. We’ve only been working on our layout for about two months but already we have a nice collection of modules that we have displayed at two events and at the LEGO Store at the Mall of America. Head over to the TwinLUG Flickr Group to see tons of pictures of Micropolis and other group events.
Q. Why 16×16 modules?
A. We wanted to make the smallest discrete module something that anyone with even a very modest collection of LEGO bricks could fairly easily put together.
Q. Where can I get enough parts to build a module?
A. The hardest part for people with smaller collections will probably be the tiles used for the roads and sidewalks but those can be fairly easily sourced from LEGO Sets, Pick-A-Brick, BrickLink, or other builders.
Q. Why not use baseplates instead of plates for the bottom of the modules?
A. While some builders have many 16×16 baseplates available in their collections others don’t have any and currently 16×16 baseplates are not available for sale new from The LEGO Group.
Q. What if I wanted to build a bigger module?
A. Go for it! Some ideas just won’t fit on a single 16×16 module. In our own layout we have a combination of 16×16, 16×32, and 32×32 modules so far and some members have talked about ideas that are much larger than that! However in order for the module to be compatible with a group build it should be “self-contained” and include the Technic bricks at appropriate locations and have the standard road and sidewalk borders so that when it is included with other modules the roads and sidewalks are contiguous.
Q. Why 32×32 city blocks?
The basic answer is simplicity. If you are going to invite 100 people to come up with a module to bring to an event the only way that goes really smoothly with very little coordination is if the spec is simple.
The problem with rectangular blocks or oversized blocks is that you need at least two different kinds of modules to fill the shape properly. For example, our basic 16×16 module has streets and sidewalks on two sides. Let’s call that Module A. A standard 32×32 Micropolis city block then can be assembled with four of these types of modules:
A small rectangular block that is 32×48 and contains up to six 16×16 modules has to have a second module type that only has streets and sidewalks on one side to fill between the ends of the block. We’ll call that Module B. Rectangular blocks then get assembled in just about any length by filling between the ‘A’ modules with ‘B’ modules like so:
Or if you’re into late 70′s pop music:
Or if you like badly designed suburbs with no cross streets:
Larger square blocks are even more complicated because you need to fill in the middle of the block with modules that have no streets and sidewalks. Let’s call that Module C. Larger square blocks then get assembled in just about any size by filling in the middle of the ‘A’ and ‘B’ modules like so:
ABA BCB ABA
ABBBA BCCCB BCCCB ABBBA
Things get really weird when you start talking about non regular blocks with cutouts and cul-de-sacs. At that point we should probably start talking about counting points of shared infrastructure and their configuration which honestly sounds like a whole bunch of fun in about five years but is a bit much for the first version of the spec. We are not saying that it’s impossible to manage such a thing just that for a first simple spec that it’s a bad idea and that keeping things to a very simple 32×32 blocks with exceptions for oversized modules that are fully bordered with streets and sidewalks keeps things simple and very easy to assemble from hugely disparate builders.
Q. What about lakes, rivers, oceans, and other waterfront modules?
A. In order to keep our first version of the spec simple we recommend that any water features be contained to a single module. Replacing module borders with waterfront leads very quickly to the problems discussed in the answer to the question about the size of the city blocks. If you plan on including a large water feature in a group layout you should treat it like any other oversized module and make sure it has the standard Technic bricks with the normal road and sidewalk borders. Whoever is organizing the layout can obviously make any exceptions they want and we would love to hear about any creative solutions to the problem but the first version of the spec is intended to be simple.
Q. In the pictures of your layout what part did you use for the crosswalks?
A. During the build of our first layout someone had a black tile with some printed striping from the old LEGO Studios sets. A generous member went out to BrickLink and bought a pile of them and so far we’ve been using them in or own layout. Due to the relative scarcity of this part a really large group build should probably stick with the standard white 1×2 tile unless someone involved is similarly motivated to source the printed tiles.
Q. Why are the Technic bricks in different places in pictures of early layouts?
A. An early “beta” version of the spec had two Technic bricks on each side at studs 3-4 and 13-14. As we worked on the layout we noticed that the extra pin holes were unnecessary and in some cases were actually making it harder to assemble the layout so for our first published spec we changed to one Technic brick per side and are working on converting our existing modules.
Q. Does it matter if I fill the base of a module with bricks or leave it open under the top plate?
A. It depends on what you have on top of the module but in most cases you can save on part count by leaving most of the interior of the module base open though a brick or two in the middle tends to help when building on top. Some builders fill their bases completely while others leave them very open. Some modules even use the space creatively for basements or other below ground level features.